Native forests and woodlands can be managed or unmanaged.  Examples of use cases for this category include conservation forests and forests managed for timber production.

Native forests and woodlands can include many different biomes, depending largely on climate and altitude, including IUCN-GET biomes T1 (Tropical-subtropical forests), T2 (Temperate-boreal forests & woodlands), and Ecosystem Functional Group T4.4 (Temperate woodlands).

Stocks (assets)
Flows (benefits)

Area of ecosystem asset

Canopy cover

Harvested non-timber food products

Harvested non-timber food products - monetary value

Units

Area, e.g. hectares (ha)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

For example, estimate % of total land area covered by ecosystem type, multiplied by total land area.

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Maps showing extent of Australian forests, by type, are available at Forests Australia – Forest maps (select Interactive maps of Australia’s forests – Forests of Australia).

Site-specific measurements or model outputs

Data on extent of Australian forest and sparse woody vegetation are available at Data.gov.au – National Forest and Sparse Woody Vegetation Data (search for ‘National Forest and Sparse Woody Vegetation Data’ to find the latest version, e.g. National Forest and Sparse Woody Vegetation Data (Version 8.0 – 2023 Release).

Notes

Forest extent is highly dependent on the definition of forest, so the definition used should be stated. Australia’s definition of forest specifies a minimum existing or potential crown cover of 20%, a minimum mature or potentially mature stand height exceeding 2m, and stands dominated by trees usually having a single stem (SoFR 2018, p. 48). By comparison, the international FAO/UN definition is over 0.5 ha land area with tree canopy coverage of more than 10% and tree height of taller than 5m at the time of observations or at maturity.

Last updated: 11th October 2024

Type

Variable

SEEA ECT Class

Structural state

Units

Percentage (%)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring tree canopy cover and shrub layer cover can be found in AfN-METHOD-NV-01 “Land Restoration Fund (LRF) Native Vegetation Monitoring Method“. Methods for measuring woody thickening, % tree cover, % sub-canopy cover and % shrub cover can be found in AfN-METHOD-NV-08 “Method to assess the productive and environmental condition of permanent perennial pastures throughout Australia“. Methods for measuring canopy cover, sub-canopy cover and shrub cover can be found in AfN-METHOD-NV-06 “Accounting for Nature and Landcare Farming Native Vegetation Method”. Methods for measuring native tree canopy cover, non-native shrub/tree cover and native shrub cover can be found in AfN-METHOD-NV-07 “Bush Heritage Australia – Vegetation Assessment Methodology”. Methods for measuring tree canopy cover and understorey lifeforms and dominant lifeform cover can be found in AfN-METHOD-NV-11 “Tasmanian Vegetation Condition Method”. See also Eyre et al. (2015) and Brack (1999) Forest measurement and modelling – Crown closure.

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Maps of Australian native forest by crown cover class are available at Forests Australia – Forest maps.

Site-specific measurements or model outputs

Data on canopy cover for Tasmania are available at CSIRO Data Access Portal – Annual woody vegetation and canopy cover grids for Tasmania.

Last updated: 8th October 2024

Type

Variable

SEEA ECT Class

Structural state

Units

Length, e.g. metres (m)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring tree canopy height can be found in AfN-METHOD-NV-01 “Land Restoration Fund (LRF) Native Vegetation Monitoring Method“. Methods for measuring tree height and sub-canopy height can be found in AfN-METHOD-NV-06 “Accounting for Nature and Landcare Farming Native Vegetation Method” and AfN-METHOD-NV-08 “Method to assess the productive and environmental condition of permanent perennial pastures throughout Australia”. Methods for measuring native tree canopy height can be found in AfN-METHOD-NV-07 “Bush Heritage Australia – Vegetation Assessment Methodology”. See also Eyre et al. (2015).

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Maps of tree canopy height globally are available at Google Earth Engine – Global Canopy Height.

Maps showing tree canopy height for areas of Tasmania mapped with LiDAR are available at Land Information System Tasmania (LIST) – Tree Canopy Height.

Site-specific measurements or model outputs

Data on tree canopy height globally are available at Amazon Web Services (AWS) – High Resolution Canopy Height Maps by WRI and Meta.

Data on tree canopy height for areas of Tasmania mapped with LiDAR are available at Land Information System Tasmania (LIST) – Tree Canopy Height.

Notes

Work in progress - Feedback welcome

Last updated: 11th October 2024

Type

Variable

SEEA ECT Class

Structural state

Units

Volume, e.g. cubic metres (m³)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring coarse woody debris can be found in AfN-METHOD-NV-01 “Land Restoration Fund (LRF) Native Vegetation Monitoring Method”. Methods for measuring fallen logs >100mm diameter can be found in AfN-METHOD-NV-07 “Bush Heritage Australia – Vegetation Assessment Methodology”. Methods for measuring logs (forest communities only) can be found in AfN-METHOD-NV-11 “Tasmanian Vegetation Condition Method”. See also Eyre et al. (2015).

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Data on modelled estimates of Australian deadwood volume are available at Full Carbon Accounting Model (FullCAM).

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024

Type

Variable

SEEA ECT Class

Landscape and seascape characteristics

Units

Length, e.g. kilometres (km)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 2

Estimate using third-party professional estimates or public data

Methods for measuring distance to core area, defined as any patch of native vegetation greater than 50 ha in size, regardless of vegetation type, condition or tenure, using aerial imagery, vegetation mapping and/or visual assessment can be found in AfN-METHOD-NV-11 “Tasmanian Vegetation Condition Method”.

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Data on extent and distribution of Australian vegetation types, from which distance to similar habitat could be manually determined, are available at the National Vegetation Information System (NVIS).

Notes

Distance from similar habitat can be defined in different ways.

Last updated: 8th October 2024

Type

Variable

SEEA ECT Class

Structural state

Units

Dimensionless

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

To the best of our knowledge, there is no definitive, up to date map of Australian native or plantation forests by age class (also known as growth stage). A map of Tasmanian forests by growth stage is available at p. 38 in State of the forests Tasmania 2022 data report.

Site-specific measurements or model outputs

Data on Australian plantation forests by type and age class are available at the latest version of Australia’s State of the Forests Report (e.g. see Australia’s State of the Forests Report 2018 – Indicator 2.1b: Age class and growing stock of plantations (2024).

Notes

Forest (or stand) age class may also be known as forest (or stand) growth stage. Forest (or stand) age in this context generally refers to the time since the last major disturbance, such as severe fire or timber harvesting. This applies particularly to even-aged forests or stands, and less so to uneven-aged forests or stands. Forests or stands can be classified into various different age classes or categories (e.g. younger regeneration, regrowth, mature and old-growth), depending on the growth rate and other characteristics of the specific type of forest.

Last updated: 8th October 2024

Units

Mass, e.g. kilogrammes (kg)

SEEA ES sub-type

Wild animals, plants and other biomass provisioning services

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

For example, estimate number of productive units (e.g. beehives), multiplied by estimated product per unit.

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

For example, third-party records of products harvested or delivered.

Data on harvested quantities of various Australian non-wood forest products are available at the latest version of Australia’s State of the Forests Report  (e.g. see Australia’s State of the Forests Report 2018 – Criterion 6: Maintenance and enhancement of long-term multiple socioeconomic benefits to meet the needs of societies.)

Site-specific measurements or model outputs

For example, on-site records of products harvested or delivered, video surveillance data, etc.

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024

Units

Currency, e.g. A$

Example methods / guidance / references

What are tiers?

Tier 1

Estimate monetary value of ecosystem contribution from residual value. The residual value method (NCAVES and MAIA, 2022) involves deducting user costs (e.g. costs of production, extraction/harvesting and processing, plus financial costs such as depreciation and return on produced assets, minus subsidies on extraction, plus taxes on extraction) from revenues from extracted/harvested products, to derive a monetary value for the ecosystem contribution.

Tier 2

Estimate monetary value of ecosystem contribution from prices in similar markets. For example, if wild plants are foraged for own consumption, the value of this ecosystem contribution can be estimated from the price of similar foods sold in markets (less production costs, if applicable) (NCAVES and MAIA, 2022).

Tier 3

N/A

Example data sources

Internal records

Third-party data sources

N/A

Notes

Work in progress - Feedback welcome

Last updated: 11th October 2024

Units

Volume, e.g. cubic metres (m³) or mass, e.g. tonnes (t)

SEEA ES sub-type

Wood provisioning services

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

For example, estimate number of truckloads removed, multiplied by estimated volume or weight per load, adjusted to include estimated % waste/residues/losses.

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

For example, third-party records of timber harvested or delivered.
Data on annual production of timber resources in Australia, by forest type, log type and state or territory, are available in the latest version of Australian Bureau of Agricultural and Resource Economics and Sciences (ABARES) – Australian forest and wood products statistics.

Site-specific measurements or model outputs

Notes

Following SEEA-EA (s. 6.4, pp. 134-137), it is recommended that the physical flow of biomass provisioning services is equal to the harvest in gross terms, i.e. before harvest losses, felling residues etc. are deducted.

Last updated: 28th October 2024

Units

Currency, e.g. A$

Example methods / guidance / references

What are tiers?

Tier 1

Estimate monetary value of ecosystem contribution from residual value. The residual value method (NCAVES and MAIA, 2022) involves deducting user costs (e.g. costs of production, extraction/harvesting and processing, plus financial costs such as depreciation and return on produced assets, minus subsidies on extraction, plus taxes on extraction) from revenues from extracted/harvested products, to derive a monetary value for the ecosystem contribution.

Tier 2

N/A

Tier 3

Estimate monetary value of ecosystem contribution from observed prices. For example, if forest land is owned by one entity, and another entity pays the owner for the right to harvest a certain amount of timber or firewood, then this observed price (typically called the stumpage value) can be used as the basis for estimating the monetary value of the ecosystem contribution, after deducting the owner’s costs incurred in managing the land. Alternatively, if forest land is privately owned and has a market price, then either an explicit price from a rental market or an implicit price derived from the market value of land, assuming a market rate of return, may be used to represent the right to harvest, analogous to the stumpage value for a given area of land (NCAVES and MAIA, 2022).

Example data sources

Internal records

N/A

Site-specific measurements or model outputs

Notes

Work in progress - Feedback welcome

Last updated: 11th October 2024

Type

Variable

SEEA ECT Class

Structural state

Units

Number per unit area, e.g. stems/hectare (ha)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring large trees can be found in AfN-METHOD-NV-01 “Land Restoration Fund (LRF) Native Vegetation Monitoring Method” and AfN-METHOD-NV-11 “Tasmanian Vegetation Condition Method“. See also Eyre et al. (2015).

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024

Type

Variable

SEEA ECT Class

Landscape and seascape characteristics

Units

Area, e.g. hectares (ha)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 2

Estimate using third-party professional estimates or public data

Methods for measuring patch size using aerial imagery, vegetation mapping and/or visual assessment can be found in AfN-METHOD-NV-11 “Tasmanian Vegetation Condition Method”.

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Maps showing satellite imagery, from which patch size could be manually determined, are available from Google Maps.

Site-specific measurements or model outputs

Data on extent and distribution of Australian vegetation types, from which patch size could be manually determined, are available at the National Vegetation Information System (NVIS).

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024

Type

Variable

SEEA ECT Class

Functional state

Units

Percentage (%)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring native tree canopy health can be found in AfN-METHOD-NV-07 “Bush Heritage Australia – Vegetation Assessment Methodology”.

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Notes

Proportion of healthy canopy cover present means the percentage of expected healthy canopy cover of individual trees, as appropriate to the species, ranging from a completely dead tree at 0% to a full canopy at 100%. It differs from canopy cover which generally applies at a larger scale and thus captures the gaps between tree canopies, as well as individual tree canopy density.

Last updated: 8th October 2024

Type

Variable

SEEA ECT Class

Compositional state

Units

Percentage (%)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring non-native plant cover, or the percentage cover of the total vegetation cover that is comprised of exotic and non-indigenous species, using visual observation can be found in AfN-METHOD-NV-01 “Land Restoration Fund (LRF) Native Vegetation Monitoring Method” and AfN-METHOD-NV-06 “Accounting for Nature and Landcare Farming Native Vegetation Method“. Methods for measuring lack of weeds, defined as weeds percentage cover of all native plant species, can be found in AfN-METHOD-NV-11 “Tasmanian Vegetation Condition Method”.

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Data on identified natural and modified areas of Australia are available at Find Environmental Data – Natural areas of Australia – 100 metre. Note that this source only provides a binary classification into areas presumed to be relatively natural, and those that have been highly modified – not the actual proportion of native species.

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024

Type

Variable

SEEA ECT Class

Structural state

Units

Percentage (%)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring recruitment of dominant canopy species (proportion of dominant species present at a site that are regenerating) can be found in AfN-METHOD-NV-01 “Land Restoration Fund (LRF) Native Vegetation Monitoring Method”. Methods for measuring recruitment (forest communities only) and persistence potential (non-forest communities only) can be found in  AfN-METHOD-NV-11 “Tasmanian Vegetation Condition Method.” See also Eyre et al. (2015).”

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Recruitment, or the capacity for regeneration, can be measured in different ways, such as by measuring the presence of seedlings/young individuals of dominant species, presence of re-sprouting species after fire or other disturbance, or presence of viable seeds or seed-dispersing adult individuals of dominant species.

Site-specific measurements or model outputs

Notes

Recruitment, or the capacity for regeneration, can be measured in different ways, such as by measuring the presence of seedlings/young individuals of dominant species, presence of re-sprouting species after fire or other disturbance, or presence of viable seeds or seed-dispersing adult individuals of dominant species.

Last updated: 10th October 2024

Units

Mass, e.g. tonnes of carbon (tC), carbon dioxide (tCO2) or carbon dioxide equivalent (tCO2-e)

SEEA ES sub-type

Global climate regulation services

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

A variety of greenhouse gas accounting tools for Australian primary industries, some of which include methods to estimate sequestered and/or retained carbon, can be found at the Primary Industries Climate Challenges Centre (PICCC)

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Data on Australian forest and harvested wood product carbon stocks by state/territory and type of forest are available at the latest version of Australia’s State of the Forests Report (select Criterion 5: Maintenance of forest contribution to global carbon cycles).

Site-specific measurements or model outputs

Data on Australian carbon stocks are available at Full Carbon Accounting Model (FullCAM).

Notes

The ecosystem service of carbon retention is measured by the opening stock of retained carbon (see SEEA-EA s. 6.4.3, pp. 139-140) as a proxy for the flow of this service. The scope conventionally covers above- and below-ground living and dead biomass and soil carbon up to 2m depth. Carbon retained in harvested wood products should not be considered an ecosystem service (SEEA-EA, s. 6.4.3, pp. 139-140), although it could be included in an entity’s carbon account or impact statement. An increase in retained carbon from year to year should equal the flow of the ecosystem service of carbon sequestration.

Last updated: 8th October 2024

Units

Currency, e.g. A$

Example methods / guidance / references

What are tiers?

Tier 1

Estimate monetary value of ecosystem contribution by multiplying the total amount of carbon stored at the beginning of the accounting period by a suitable cost of carbon, and multiplying this amount by a suitable rate of return to create an annuity representing the flow of retained carbon services. A suitable cost of carbon for Tier 1 might be a social cost of carbon derived from the literature (see discussion of the range of possible values in NCAVES and MAIA, 2022).

Tier 2

N/A

Tier 3

Estimate monetary value of ecosystem contribution by multiplying the total amount of carbon stored at the beginning of the accounting period by a suitable cost of carbon, and multiplying this amount by a suitable rate of return to create an annuity representing the flow of retained carbon services. A suitable cost of carbon for Tier 3 might be a social cost of carbon derived from a national model (see NCAVES and MAIA, 2022).

Example data sources

Internal records

N/A

Site-specific measurements or model outputs

Notes

Technically, the full price paid in ERF auctions per tonne of CO₂e sequestered is for the combined services of carbon sequestration and retention for 100 years. However, it can be assumed that the price component for annual retention is small, therefore the ERF price approximates the current value of carbon sequestration services.

Last updated: 11th October 2024

Units

Mass, e.g. tonnes of carbon (tC), carbon dioxide (tCO2) or carbon dioxide equivalent (tCO2-e)

SEEA ES sub-type

Global climate regulation services

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

A map-based calculator for Australian landholders to estimate their emissions and annual sequestered carbon is available at the Platform for Land and Nature Repair (PLANR)

A variety of greenhouse gas accounting tools for Australian primary industries, some of which include methods to estimate sequestered and/or retained carbon, can be found at the Primary Industries Climate Challenges Centre (PICCC)

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Data on Australian forest and harvested wood product carbon stocks by state/territory and type of forest are available at the latest version of Australia’s State of the Forests Report.

Site-specific measurements or model outputs

Data on Australian carbon stocks are available at Full Carbon Accounting Model (FullCAM)

Notes

Additional tools are available to estimate potential changes in net emissions or sequestration from various project activities, such as LOOC-C.

Last updated: 8th October 2024

Units

Currency, e.g. A$

Example methods / guidance / references

What are tiers?

Tier 1

Estimate monetary value of ecosystem contribution by multiplying the total amount of carbon sequestered over the accounting period by a suitable cost of carbon derived from observed prices in a relevant emissions trading scheme (NCAVES and MAIA, 2022). The relevant tier would depend on the granularity and accuracy of the underlying biophysical model and/or measurements used to estimate the physical flow of carbon sequestration services.

Tier 2

Estimate monetary value of ecosystem contribution by multiplying the total amount of carbon sequestered over the accounting period by a suitable cost of carbon derived from observed prices in a relevant emissions trading scheme (NCAVES and MAIA, 2022). The relevant tier would depend on the granularity and accuracy of the underlying biophysical model and/or measurements used to estimate the physical flow of carbon sequestration services.

Tier 3

Estimate monetary value of ecosystem contribution by multiplying the total amount of carbon sequestered over the accounting period by a suitable cost of carbon derived from observed prices in a relevant emissions trading scheme (NCAVES and MAIA, 2022). The relevant tier would depend on the granularity and accuracy of the underlying biophysical model and/or measurements used to estimate the physical flow of carbon sequestration services.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Notes

Work in progress - Feedback welcome

Last updated: 11th October 2024

Type

Variable

Units

Various

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Notes

Example variables relatively easily estimated include dominant tree height (a major influence on shelter) and % crown cover (a major influence on shade). More advanced variables include the above plus configuation (e.g. length, gaps, distance to sheltered area and orientation to prevailing wind). May involve basic modelling. Advanced variables include all of the above plus porosity in context of weather factors. May involve advanced modelling.

Last updated: 8th October 2024

Units

Various (see Notes)

SEEA ES sub-type

Local (micro and meso) climate regulation services

Intermediate or final

Final or intermediate (see Notes)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 2

Estimate using third-party professional estimates or public data

For example, estimate using in-field, machine or animal sensing data and/or crop/pasture/livestock production models.

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

For example, measure using in-field, machine and/or animal sensing data.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Notes

Plantations can provide shade and/or shelter from wind, rain and/or snow as an intermediate service benefitting livestock, forage or crops for harvest as final services. The benefits should therefore appear in the financial accounts (in the form of increased productivity of livestock, pasture or crops) and/or elsewhere in the ecosystem accounts (under the ecosystem assets that benefit from the intermediate service). Nevertheless, it may be analytically useful to understand the contribution of shelter provision to these final services, as long as care is taken not to add the monetary value of intermediate and related final services together (see ecosystem services – monetary flows).

Shade and shelter services can be measured in various different ways, such as by measuring the contribution to additional yield (t/ha * ha affected) or contribution to additional liveweight (kg/standard animal unit * standard animal units affected).

Last updated: 1st October 2024

Units

Currency, e.g. A$

Example methods / guidance / references

What are tiers?

Tier 1

Estimate monetary value of ecosystem contribution from replacement cost, or how much it would cost to provide shade or shelter if the ecosystem service was not available; or from the cost of avoided damages that would be incurred in the absence of the ecosystem service (NCAVES and MAIA, 2022).

Tier 2

Tier 3

Estimate monetary value of ecosystem contribution from the productivity change resulting from the provision of the ecosystem service (NCAVES and MAIA, 2022).

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024

Type

Variable

Units

Percentage (%)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Maps of Australian vegetation types in a given area are available at the National Vegetation Information System (NVIS).
Maps of native and derived vegetation in a given area within the Australian Capital Territory are available at the ACT Government Geospatial Catalogue.

Site-specific measurements or model outputs

Data on Australian vegetation types in a given area are available at the National Vegetation Information System (NVIS).
Data on native and derived vegetation in a given area within the Australian Capital Territory are available at the ACT Government Geospatial Catalogue – ACTGOV Vegetation Map 2023.

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024

Type

Variable

Units

Various

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 2

Estimate using third-party professional estimates or public data

Methods for measuring soil pH, soil organic carbon, salinity, extractable phosphorus and groundcover can be found in AfN-METHOD-S-02 “Level 3 Soil Assessment for Productive Land (Landcare)“. Methods for measuring soil organic carbon, total nitrogen, soil pH, ground cover, salt-affected area/saline extent, soil electrical conductivity and bulk density can be found in AfN-METHOD-S-01 “Land Restoration Fund (LRF) Soil Health Monitoring Method“.

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Methods for measuring soil acidity, soil organic carbon, salinity, extractable phosphorus and groundcover can be found in AfN-METHOD-S-02 “Level 3 Soil Assessment for Productive Land (Landcare)“. Methods for measuring soil organic carbon, total nitrogen, soil pH, ground cover, salt-affected area/saline extent, soil electrical conductivity and bulk density can be found in AfN-METHOD-S-01 “Land Restoration Fund (LRF) Soil Health Monitoring Method”.

Example data sources

Internal records

Third-party data sources

Maps of various spatially modelled Australian soil variables are available at the Soil and Landscape Grid of Australia – Soil and Landscape Grid Viewer.

Maps of various spatially modelled and measured Australian soil variables are available at Visualising Australasia’s Soils (VAS).

Site-specific measurements or model outputs

Data on various spatially modelled Australian soil variables are available at the Soil and Landscape Grid of Australia – Get the Data.

Data on various measured Australian soil variables (obtained from various state and national data sources) are available at SoilDataFederator.

Data on various measured Australian soil variables are available at the Australian National Soil Information System (ANSIS) Data Portal.

Notes

Example variables relatively easily estimated include % bare ground, % productive land with retained stubble; other soil surface features. A useful reference, particularly for rangelands soils, is Tongway, D.J. and Hindley, N.L. (2004) More advanced variables include the above plus pH, % SOC, salinity, NPK, Cation Exchange Capacity (CEC), soil water holding capacity. The depth and/or mass of soil covered by a measurement should be stated, ideally stating values for all layers within the soil profile to at least 1m depth. Advanced variables include all of the above plus biological functioning.

Last updated: 29th October 2024

Type

Variable

SEEA ECT Class

Compositional state

Units

Number

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Tier 2

Estimate using third-party professional estimates or public data

Methods for measuring native plant species richness per life form (trees, shrubs, grasses and forbs/other) using visual observation can be found in AfN-METHOD-NV-01 “Land Restoration Fund (LRF) Native Vegetation Monitoring Method”. Methods for measuring native species count for tree canopy and shrub layer species can be found in AfN-METHOD-NV-07 “Bush Heritage Australia – Vegetation Assessment Methodology”.

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Methods for measuring terrestrial mammal species richness using wildlife camera records can be found in AfN-METHOD-F-01 “Accounting for Nature Australian Terrestrial Mammal Method”. Methods for measuring aquatic vertebrate species richness using eDNA measurement can be found in AfN-METHOD-F-05 “EnviroDNA Aquatic Vertebrate eDNA Method”.

Example data sources

Internal records

Third-party data sources

Maps showing the number of species in a given area are available at the Atlas of Living Australia (select layer: Species richness).

Site-specific measurements or model outputs

Data on the number of species in a given area are available at the Atlas of Living Australia (select layer: Species richness).

Notes

Species richness can be defined as “The number of species within a given sample, community, or area” (IPBES). It is one way of measuring species diversity, which is itself only one aspect of overall biodiversity. The concept of richness can also be applied at other levels, from genetic (e.g. the number of distinct genotypes within a species) to the number of represented genera, families, etc. It can be useful to supplement richness information with information on abundances or relative abundance distributions.

Depending on the purpose of measurement, and the measurement resources available, the concept of species richness may be applied to certain sets (e.g. plants, mammals, birds, invertebrates, endemic species, etc.). It is important to recognise that observations from one set may not apply to other sets in the same area.

It is usually not feasible to count all species, even within a limited set, within a given area. Therefore some form of sampling method is usually applied to come up with a sample set that can feasibly be measured. Many different sampling methods may be used, and the number of samples required will depend on the measurement objectives (e.g. desired accuracy and confidence), the sample measurement method (e.g. size of sample areas), and the actual variation in the measured quantity across the given area. There are also many different measurement methods and technologies at the sample measurement level (e.g. pit traps for insects, camera traps for animals, acoustic methods for birds). There is no single ‘right’ method that applies in all circumstances. Whatever method is used, it is important that it should be applied consistently for a given site over time, and appropriate to the measurement objectives and ecosystem type. Measurements using different methods may not necessarily be comparable.

Last updated: 10th October 2024

Type

Variable

SEEA ECT Class

Structural state

Units

Number per unit area, e.g. stems/hectare (ha)

Example methods / guidance / references

What are tiers?

Tier 1

Estimate using own judgement and observations

Methods for measuring native tree density can be found in AfN-METHOD-NV-07 “Bush Heritage Australia – Vegetation Assessment Methodology”. Methods for measuring stand density can be found at Forest Measurement and Modelling – Stand density.

Tier 2

Estimate using third-party professional estimates or public data

Tier 3

Model or measure based on site-specific surveys/sampling, remote or in-field sensing, laboratory analysis, etc.

Example data sources

Internal records

Third-party data sources

Site-specific measurements or model outputs

Notes

Work in progress - Feedback welcome

Last updated: 16th October 2024